9 Quality innovations

Lumberland proudly present … The method of eliminated all problem of the traditional floor installation with 9 Quality innovations. It will be the new standards with the real innovation which registered by the Department of Intellectual Property. It is warranty that now is the best choice for who like the real wood floors.

1. Tenon & Mortise joint rail system: T&M
   

   

   Our products which used this system called “LumberLoc” to be the trademark. LumberLoc is the new innovation and standard for free-floating installation method. T&M technology lock the planks (of all kind of wood floors or another material) joint together, for a lasting connection without squeak, disclose and buckle, prefinished, easy & fast DIY installation with requires no tricky nail, glue or any connection element.

2. SoundShiel ^®
   

   

   We are the first who create the innovation for protect the squeak while walk on wood floors with special glue film stick on the tenon which more efficiency than the traditional wax.

3. LumberShiel ^®
   

    

   The closed cell underlayment coats with nano compound to made be hydrophobic property same as lotus effect. It is suitable hardness and elastic, life times and used for level adjustment, noise absorption and moisture protection. Used with “floating floor installation method”.

4. StickShiel ^®
   

   

   The advance installation method by laminated waterproof glue on the both sides of Lumbershiel^® surface called “semi floating floor installation method”. One side stick on the bottom of wood floors and the other side paste directly underneath the floor surface. Add attachment for a lasting connection while allowing wood expansion and still keep the good property of LumberShiel^®

5. DoubleLoc ^®
   

   

   The system which include the good property of T&M and StickShile^® together is install by “semi floating floor installation method”. Instead glue using but still keep feeling as “fix floor installation method”. Eliminate the cost, fussy and problem from using glue. The our products which used this system called “LumberLocPlus^®”

6. LumberQuet ^{Plus ®}
   

   

   To don’t immediately violate the old customer behavior who are use to the traditional installation. We proudly presents to use good property of StickShiel^® include T&G to instead glue but still keep feeling as “fix floor installation method”. Install by “semi floating floor installation method”. Eliminate the cost, fussy and problem from using glue. The our products which used this system called “LumberQuetPlus^®”

7. TopShiel ^{® *}
   

   

   To be create new standard in our product with using the scotch tape film cover the floor surface for protect the scratch before and after installation and prompt to peel off when using.

8. DecayShiel ^{® *}
   

   

   The special non toxic compound for coating on wood use for protect split termite, fungi and split from over dry wood when used outdoor and also can use indoor or wetting area.

   * Option to be mention

9. MaxCoats ^®
   

   The supremely wear resistant and newest innovation by advanced aluminium oxide on sealer layer and nano-corundum compound on the both top coat is the reason for all Lumberland hardwood floors are no grey mark, more wear and stain resistant than other prefinished floor.

   
   

   

   
   

   Test Standards Unit Result Abrasian Resistance DIN 68861 TL2 (S33 abrasive paper) cycle IP > 2300 Adhesion EN ISO 2409 n.a. GTO (100%) Glass Value DIN EN ISO 2813/60 angle % 25 ± 5 Scratch Resistance Steel wool grade 2 n.a. No scratches Coin Test Hamberger planer Newton 32